Stoody Brilliant 410NiMo T-1 AP
Stoody AP stainless steel wires are designed for welding in all positions with Argon/CO2 gas mixtures or 100% CO2. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. Stoody 410NiMo T-1 AP wires can be used to join martensitic stainless steels such as type 410 used in valve and pump manufacturing. These wires can also be used for the repair and joining of ACICA6NM castings. AWS Classification: A5.22 E410NiMoT1-1/-4.
Typical Tensile Properties
| Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| 18 % | 100% CO2 | 924 MPa (134 ksi) | 814 MPa (118 ksi) |
Deposition Data
| Current | 190-300 A |
| Deposition Type | 3 |
| Diameter | 1/16 in. |
| Diameter | 1.6 mm |
| Shielding Gas | 75% Ar - 25% CO2 |
| TTW Dist. | 3/8-7/8 in. |
| TTW Dist. | 10-22 mm |
| Voltage | 24-27 V |
| Wire Feed Speed | 150-245 in./min |
| Wire Feed Speed | 381-622 cm/min |
Classifications
| Grade | E410NiMoT1-1/-4 |
| Name | AWS A5.22 |
Typical Weld Metal Analysis %
| C | Cr | Cu | Fe | Mn | Mo | Ni | P | S | Si |
| 0.03 % | 12.3 % | 0.01 % | BAL % | 0.25 % | 0.6 % | 4.5 % | 0.01 % | 0.01 % | 0.3 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.