ESAB

OK Autrodur 38 G M

The following items have been added to your list


x

A copper coated, low-alloyed solid GMAW wire used for hard facing and building up, giving a wear resistant weld metal with a hardness between 35-40 HRC. Used for repair and maintenance of e.g. tracks, rails, wheels, rolls, railcrossings, shafts, shovel teeth and other parts on digging machines, tools like dies etc.

BUY NOW


Deposition Data

Current Deposition Rate Diameter Voltage Wire Feed Speed
120-350 A 1.5-6.6 kg/h (3.3-14. lb/h) 1.2 mm (0.047 in.) 20-33 V 2.7-12.4 m/min (106-488 in./min)
80-280 A 1.0-5.4 kg/h (2.2-11. lb/h) 1.0 mm (0.040 in.) 18-28 V 2.7-14.7 m/min (106-579 in./min)

Classifications

2
Grade Fe2
Name EN 14700

Approvals

Grade 1.2MM
Society NAKS/HAKC
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Low alloyed (0.7 C, 2 % Mn, 1 % Cr, 0.2 % Ti)
Shielding Gas M12, M21, C1 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Mn P S Si Ti
0.69 % 1.00 % 1.92 % - - 0.49 % 0.2 %
Typical Weld Metal Analysis %
Shielding gas;80Ar/20CO2
0.6 % 1.0 % 1.4 % 0.01 % 0.01 % 0.4 % 0.06 %
Shielding gas;CO2
0.6 % 1.0 % 1.0 % 0.01 % 0.01 % 0.2 % 0.05 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrodur 38 G M
1389107700 Find a distributor
1389127700 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..