OK Autrodur 58 G M
A copper coated, low-alloyed solid GMAW wire used for hard facing and building up highly wear resistant layers on machinery parts like shafts, feed screws, driving rollers, cutting tools, dies and other parts subjected to strong wear. Hardness of the weld metal becomes 50-60 HRC.
Deposition Data
Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
120-350 A | 1.5-6.6 kg/h (3.3-14. lb/h) | 1.2 mm (0.047 in.) | 20-33 V | 2.7-12.4 m/min (106-488 in./min) |
80-280 A | 1.0-5.4 kg/h (2.2-11. lb/h) | 1.0 mm (0.040 in.) | 18-28 V | 2.7-14.7 m/min (106-579 in./min) |
Classifications
2 | |
Grade | ZFe8 |
Name | EN 14700 |
Consumable Characteristics
Alloy Type | Low alloyed (1.1 % C, 2 % Mn, 1.8 % Cr, 0.2 % Ti) |
Shielding Gas | M21, C1 (EN ISO 14175) |
Typical Weld Metal Analysis %
Typical Wire Composition % | ||||||||||||||
C | Cr | Mn | P | S | Si | Ti | ||||||||
1.04 % | 1.82 % | 1.87 % | - | - | 0.48 % | - | ||||||||
Typical Weld Metal Analysis % | ||||||||||||||
Shielding gas: 80Ar20CO2 | ||||||||||||||
0.9 % | 1.6 % | 1.6 % | 0.01 % | 0.01 % | 0.4 % | 0.10 % | ||||||||
Shielding gas: CO2 | ||||||||||||||
0.8 % | 1.6 % | 1.5 % | 0.01 % | 0.01 % | 0.4 % | 0.08 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.