Stoody HB-56
Stoody HB-56 is a general purpose non-cracking hardbanding alloy that offer high hardness in a casing friendly deposit. HB-56 offers a balance of impact and abrasion resistance and can be applied to carbon and low alloy steels with or without tungsten carbide addition. Deposits are crack free when applied over new or properly rebuilt tool joints using appropriate preheats.
Features
- Non-cracking hardbanding of new or properly rebuilt tool joints using proper preheats
- Can be applied to both carbon and low alloy steels
Deposition Data
| Current | 200-350 A |
| Deposition Rate | 12 lb/h |
| Deposition Rate | 5.4 kg/h |
| Diameter | 1/16 in. |
| Diameter | 1.6 mm |
| Deposition Efficiency (%) | 97 % |
| Shielding Gas | 98% Ar - 2% O2 or 75% Ar - 25% CO2 |
| TTW Dist. | 3/4-1 in. |
| TTW Dist. | 19-25 mm |
| Voltage | 27-31 V |
Typical Weld Metal Analysis %
| C | Cr | Fe | Other |
| 0.5 % | 6.0 % | BAL % | 4.0 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.