Stoody 134-O
Stoody 134 deposit is a high chromium-iron alloy recommended for applications subject to severe abrasion, moderate impact, and high compressive loads. It can be deposited on carbon, low alloy, and manganese steel.
Features
- Deposits are normally limited to two layers, develop cross checks, and are not machinable or forgeable. It can be used in hot wear applications up to 900F.
Typical Tensile Properties
Deposition Data
| Current | 300-350 A |
| Deposition Type | 3 |
| Diameter | 7/64 in. |
| Diameter | 2.8 mm |
| TTW Dist. | 3/4-1 1/4 in. |
| TTW Dist. | 19-32 mm |
| Voltage | 26-28 V |
Typical Weld Metal Analysis %
| C | Cr | Fe | Other |
| 4.0 % | 26.0 % | BAL % | 4.0 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.